Just follow the easy steps below to assemble each Humydry® device:
Pylar 35.3 oz. Device
1- Remove the used refill from the device.
Once the refill dissolves, empty the liquid down the toilet and add a new Humydry refill.
Humydry® Premium 15.9oz. and Humydry Premium 35.3oz. moisture absorbers are innovatively designed with a patented anti-spill system and security clips, that prevent spills and leaks in case the device is bumped or overturned.
1- Remove the used refill from the device.
2- Open the refill protective bag and remove the refill.
3- Place the filter tray onto the bucket and then place the refill onto the filter tray.
4- Put the cover onto the tub. Make sure the cover and device corners align and activate the clips. Check that the refill is completely tucked inside the device then secure the lid into place using the safety clips. Â
Caution: if the refill is not fully tucked inside the lid it will NOT close properly.
Once the refill dissolves, empty the liquid down the toilet and add a new Humydry refill.
